Bore Cleaning

Bore cleaning may be one of the most labor-intensive steps in gun maintenance, but neglecting to do this step can negatively affect performance and cause damage to the gun.

What you’ll need: Bore Brush, Cleaning Rod, Solvent, Patch Holder, Patches, Gun Oil/Lubricant


  1. Rub the inside of your bore with some solvent, then leave it for a few minutes
  2. Scrub the bore of the barrel by pushing the brush back and forth. Add more solvent as needed.
  3. Remove the bore brush and attach . . .

    Please log in to access this content.

    If you are experiencing issues logging in, please register here.

    If you are not yet a FPA member, Join Here